Sharp MX-6070N User Manual
Page 96
1-93
BEFORE USING THE MACHINE►STOPPING/DELETING A JOB, PRIORITY PROCESSING AND CHECKING THE STATUS
Completed job
* If the receiving machine is a SHARP machine, the receiving machine will return "dispatched" if the fax was received
normally, or "processed" if reception failed.
When delivery confirmation is set for Internet Fax, the disposition feeld value indicated on the delivery confirmation
return e-mail appears.
Display
Status
"OK"
Normal termination
"Send OK"
Transmission was completed.
"NG Ck Line"
Fax line cable is not connected
"In Memory"
Reception completed but the fax has not been printed.
The received data (each page) has not been printed or forwarded. (The received data has not
been deleted.)
"Received"
Printed received fax data.
The fax has been received.
The received data (each file) was stored.
"Forward OK"
The received data/received data (each file) has been forwarded.
"Stopped"
The job was stopped.
"Delete"
Deleted received data in the image check screen.
"Number of successful
transmission
destinations/Total
destinations OK"
Completion of a broadcast transmission, serial polling, or inbound routing operation.
If transmission to 3 destinations was successful out of a total of 5, "003/005 OK" will appear.
"No Response"
An error occurred because there was no response from the destination.
"Busy"
An error occurred because the other party was busy.
"Received"
E-mail other than Internet fax received
"Rejected"
A fax was sent from a party that has been blocked by the anti junk fax function.
"NGxxxxxx"
Transmission/reception was not successful because a communication error occurred (a 6-digit
error code appears in xxxxxx.)
"Error"
An error occurred while the job was being executed.
"displayed"
*
Displayed at the receiving machine when delivery confirmation is set
"dispatched"
*
Forwarded elsewhere before being displayed at the receiving machine when delivery
confirmation is set
"processed"
*
Processed without being displayed at receiving machine when delivery confirmation is set
"deleted"
*
Message deleted at receiving machine when delivery confirmation is set
"denied"
*
Receiving machine refused to notify sending machine of message processing content when
delivery confirmation is set
"failed"
*
An abnormal condition occurred when delivery confirmation is set