Output and density adjustment functions -127, Reversing white and black in a copy, B/w reverse) -127 – Sharp MX-6070N User Manual
Page 291: Output and density adjustment functions, Reversing white and black in a copy (b/w reverse)
2-127
OUTPUT AND DENSITY ADJUSTMENT
FUNCTIONS
REVERSING WHITE AND BLACK IN A COPY (B/W
REVERSE)
This function reverses black and white in a copy to create a negative image. This function can only be used for black and
white copying.
Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce
toner consumption.
• B/W Reverse must be specified before scanning the original.
• When this function is selected, the "Exposure/Original Type" setting for exposure adjustment automatically changes to "Text".
• This function is not available in some countries and regions.
When this function is selected, you cannot use the [Colour Start] key.
1
Tap the [Others] key, and tap the [B/W Reverse] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
To cancel the B/W reverse setting:
Tap the [B/W Reverse] key to uncheck it.
2
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-80)
► DOCUMENT GLASS (page 1-82)
To cancel all settings:
Tap the [CA] key.
3
Tap the [B/W Start] key to start copying.
Originals
B/W reverse copy