Fold setting -47, Fold setting, Tap the [detail] key to change to normal mode – Sharp MX-6070N User Manual
Page 211: Tap the [others] key, and tap the [fold] key, Select the folding method, Copier ► basic procedure for making copies
2-47
COPIER►BASIC PROCEDURE FOR MAKING COPIES
FOLD SETTING
This function is used to fold copies before delivery to the output tray.
• To change the default fold setting:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Fold].
• A saddle stitch finisher or saddle stitch finisher (large stacker) is required to use the fold function.
• The fold function cannot be used in combination with the staple function and punch function.
• The folding function cannot be combined with the staple function or punch function.
• You can check the selected folding method in "
1
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
2
Tap the [Others] key, and tap the [Fold] key.
3
Select the folding method.
After the settings are completed, tap
.
Fold Inside
Fold Outside
Preview
Start
Back
Copy 2-facing Pages of a Book
Sort/Group
Change Sort/Group
Book Copy
Erase Shadow Around
Erase
Change Size/Direction.
Original
Register This Function
in Favorite
Colour
Start
Fold Outside
Fold Inside
Fold
Off
Others
Output Tray
Offset
CA
B/W
Fold Multiple
Sheets Together