Sharp MX-6070N - Manual (Page 429)

4-26
FACSIMILE►BASIC TRANSMISSION METHODS
AUTOMATIC REDUCTION OF THE TRANSMITTED
IMAGE
If the width of the transmitted image is larger than the width of the paper in the receiving machine, the image will be
automatically reduced to fit the receiving machine's paper width.
Example: Reduced sizes and reduction ratios
TRANSMITTABLE ORIGINAL SIZES
The following original sizes can be transmitted.
A long original can be transmitted.
Transmitted image
width
Receiving machine's
paper width
Reduced size Scaling
A3 (11" x 17") B4 B4 1:0.8
A3 (11" x 17") A4 (8-1/2" x 11") A4R 1:0.7
B4 A4 (8-1/2" x 11") A4R 1:0.8
To cancel the Auto Reduction Sending setting:
In "Settings", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] → [Auto Reduction
Sending Setting].
If this setting is disabled, the image will be sent at full size and part of the image may be cut off.
Minimum original size Maximum original size
Using the automatic document feeder
131 mm (height) x 140 mm (width)
(5-1/8" (height) x 5-1/2" (width)) 297 mm (height) x 1000mm (width)
(11-5/8" (height) x 39-3/8" (width))
Using the document glass -
297 mm (height) x 432 mm (width)
(11-5/8" (height) x 17" (width))