Setting mode for fax, Refer to, System settings – Sharp MX-6070N User Manual
Page 893
7-178
SYSTEM SETTINGS►SETTING MODE FOR FAX
The following lists the Setting mode for fax and factory default settings.
System Settings
U: General user; A: System administrator/Administrator
SETTING MODE FOR FAX
Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Setup Items
Factory default setting
U
A
■ System Settings
●
Image Send Settings (page 7-180)
No
Yes
X Fax Settings
No
Yes
Default Settings
No
Yes
• Resolution Setting
No
Yes
- Apply the Resolution Set when Stored
Disabled
No
Yes
+ (No item)
Standard
No
Yes
• Dial Mode Setting
*1
Tone
No
Yes
• Auto Wake Up Print
Enabled
No
Yes
• Pause Time Setting
2 seconds
No
Yes
• Fax Dest. Confirmation Mode
Disabled
No
Yes
• Speaker Settings
No
Yes
- Speaker
Volume: 5
No
Yes
- Ringer Volume
Volume: 2
No
Yes
- Line Monitor
Volume: No Sound
No
Yes
- Fax Receive Complete Signal
Volume: 2; Tone Pattern: 3
Transmission Complete Sound
Time Setting: 3 sec.
No
Yes
- Fax Send Complete Signal
Volume: 2; Tone Pattern: 3
Transmission Complete Sound
Time Setting: 3 sec.
No
Yes
- Fax Communication Error Signal
Volume: 2; Tone Pattern: 3
Transmission Complete Sound
Time Setting: Every 0.3 seconds
No
Yes
• Remote Reception Number Setting
5
No
Yes
• Original Print on Transaction Report
Print Out Error Report Only
No
Yes
• Transaction Report Print Select Setting
No
Yes
- Single Sending
Print Out Error Report Only
No
Yes
- Broadcasting
Print Out All Report
No
Yes
- Receiving
No Printed Report
No
Yes