beautypg.com

Printing received data at a specified, Time -60, Printing received data at a specified time – Sharp MX-6070N User Manual

Page 463

background image

4-60

FACSIMILE►FAX RECEPTION

PRINTING RECEIVED DATA AT A SPECIFIED TIME

You can start printing the received data at a specified time.
For stress-free printing, you should avoid printing large numbers of pages at peak times during the day, and when you
do not urgently need to print.

• The printed data is automatically deleted from memory.
• If the power is turned off at the specified time, printing will start at the timing when the power is turned on.
• This function can be used when "Settings (administrator)" - [System Settings] → [Image Send Settings] → [Common

Settings] → [Condition Settings] → [Preview Setting] → [Received Data Image Check Setting] is enabled.

If Hold Setting for Received Data Print is enabled, this function is not available.

To print received data at the specified time:

In "Settings", select [System Settings] → [Image Send Settings] → [Common Settings] → [Condition Settings]
→ [Time Specified Output of Received Data].

To disable the hold setting for received data print:

In "Settings (administrator)", disable this function using [System Settings] → [Image Send Settings] → [Common Settings]
→ [Condition Settings] → [Hold Setting for Received Data Print].

Set to print data
received during the day
at 20:00

At 20:00, printing
begins automatically

Prints