Internet fax settings -103, Internet fax settings, Default settings – Sharp MX-6070N User Manual
Page 818: Initial file format setting
7-103
SYSTEM SETTINGS►SYSTEM SETTINGS
Internet Fax Settings
Settings related to the image send function (Internet fax, Direct SMTP, etc.) can be configured.
Default Settings
Configures the default settings for Internet fax.
Resolution Setting
Apply the Resolution Set when Stored
You can apply the resolution setting that was set when the file was saved to transmission of the file.
Resolution Setting
Set the resolution used for file transmission.
Half Tone
Enable half-tones.
Auto Wake Up Print
When the [Power] button is "Off" (but the main power switch is "On") and an Internet fax is received, this function
activates the machine and prints the fax.
When this function is disabled, received Internet faxes are not printed until the ([Power] button) is switched "On".
Initial File Format Setting
File Type
This is used to set the file type for Internet fax transmission.
The following settings can be configured.
• TIFF-S
• TIFF-F
If one of the following functions is set, the image will be sent in TIFF-F format even if TIFF-S is set.
• Mixed Size Orig.
• Dual Page Scan
• Book Divide
• Card Shot
• N-Up
Compression Mode
This is used to set the compression mode for Internet fax transmission.
The following settings can be configured.
• MH (G3)
• MMR (G4)
Speaker Volume Settings
Adjusts the volume of fax receive signals and communication error signals heard through the speaker.
A fax receive signal sounds after the machine checks the mail server and retrieves received faxes. A communication
error signal sounds when a delivery failed e-mail is received from the destination Internet fax machine.
For an explanation of settings related to the fax function, see "
Image Send Settings (page 7-180)
".
These settings can be configured when the Internet fax expansion kit is installed.
[MMR (G4)] cannot be selected when [File Type] is set to [TIFF-S].