Copying sequence, Switch to copy mode, Place the original – Sharp MX-6070N User Manual

Page 171: Select functions, Copier ► before using the machine as a copier

2-7

COPIER►BEFORE USING THE MACHINE AS A COPIER

COPYING SEQUENCE

This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.

Switch to copy mode.

► SELECTING COPY MODE (page 2-4)

Place the original.

Place the original in the document feeder tray of the
automatic document feeder, or on the document glass.

► AUTOMATIC DOCUMENT FEEDER (page 1-80)
► DOCUMENT GLASS (page 1-82)

Select functions.

Specify the original scan size, exposure, resolution, etc.
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.

► Specifying the orientation of the original (page 2-33)

If necessary, you can refer to the following functions for the setting.

In Easy mode

In Normal mode

• Paper Select

• 2-Sided Copy

• Copy Ratio

• Staple / Punch