Print port settings -145, External print services settings -145, Print port settings – Sharp MX-6070N User Manual
Page 860: External print services settings, Google cloud print settings
7-145
SYSTEM SETTINGS►SYSTEM SETTINGS
Print Port Settings
LPD
Enter a profile expiring date.
LPD Settings
LPD
Set this option to use LPD.
Timeout
Enter a timeout. The default setting is 90 seconds.
Use Banner
Set this option to use the banner. The default setting is "Invalid".
RAW
Raw Print Settings
Raw Print
Set this option to use RAW printing. The default setting is "Valid".
Port Number
Enter a port number. The default setting is port 9100.
Timeout
Enter a timeout. The default setting is 90 seconds.
Use Bidirectional
To use bidirectional communication, set to
.
WSD
WSD Settings
WSD Print
Set this option to use WSD printing.
Use Multicast Discovery
Set this option to use multicast discovery.
External Print Services Settings
Google Cloud Print Settings
Google Cloud Print
Specify whether or not Google Cloud Print is used.
Status
"Not Set", "Registering", "Registered", or "Offline" will appear.
Always Retain Prints
The retention print function can be enabled in Google Cloud Print.
When this setting is enabled, Google Cloud Print jobs are saved in the "Main Folder" of the document filing function of the machine.
When this setting is disabled, the machine starts printing immediately after it receives a Google Cloud Print job.
This shows the e-mail address of the Google account of the administrator who registered the machine in Google Cloud Print.
Device Name
Set the device name that appears on the client device.
This setting is the same as the device name on the machine information page of the status.