Sharp MX-6070N - Manual (Page 253)

2-89
COPIER►OTHER FUNCTIONS
COPYING IN THE CENTRE OF THE PAPER (CENTRING)
This function centres the copied image on the paper.
This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the
image is reduced.
Not using the centring function Using the centring function
Centring must be specified before scanning the original.
• When the original size or the paper size is displayed as a special size, this function cannot be used.
• This function cannot be used in combination with an enlargement setting. If enlargement of 101% or more is selected, the
enlargement is automatically returned to 100%.
1
Tap the [Others] key, and tap the [Centring] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
• To cancel the centring setting:
Tap the [Centring] key to clear the checkmark.
• To cancel all settings:
Tap the [CA] key.
2
Tap the [Colour Start] or [B/W Start] key to start copying.