Sending both sides of a card as a – Sharp MX-6070N User Manual
Page 479
4-76
SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE
(CARD SHOT)
Send the front and reverse sides of a card as a single page, without the need to send each side separately.
When using this function, the original must be placed on the document glass.
• If the original size is larger than the send size, it will result in a sending failure. Check the original size once more, and
specify it again.
• The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.
• This function cannot be used in direct transmission mode or when the speaker is used to dial.
1
Place a card face down on the
document glass.
2
Enter the destination fax number.
• Entering a destination number using the numeric keys
• Retrieving a destination from an address book
• Using a search number to retrieve a destination
• Retrieving a destination from a global address book
• Using a transmission log to resend
3
Tap the [Others] key, and tap the [Card Shot] key.
Transmitted image
Originals
Front
Send
Example of an A4 (8-1/2" x 11") size portrait
scan transmission
Example of an A4 (8-1/2" x 11") size landscape
scan transmission
Back