Sharp MX-6070N - Manual (Page 176)

2-12
COPIER►BEFORE USING THE MACHINE AS A COPIER
Orientation of placed original
Place the original as shown below.
If you place the original in an incorrect orientation, it may result in punching at an unexpected position or stapling. On
"Preview Screen", view the image orientation or preview image.
► COPY PREVIEW (page 2-9)
Automatic copy image rotation (Rotation Copy)
If the orientation is different between the original and paper, the original image will be automatically rotated 90 degrees
to match the paper.
Document glass Document feeder tray
Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
For information on the orientation of the original, see "
Specifying the orientation of the original (page 2-33) ".
To set Rotation Copy:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Rotation Copy Setting].
When [Rotation Copy] is selected, Rotation Copy operates when Auto Paper Select or Auto Ratio Select is in effect, or when
the original and paper are the same size but the orientation is different.
When [Rotation Copy is done only at Auto Paper Select or Auto Ration Select] is selected, Rotation Copy only operates
when Auto Paper Select or Auto Ratio Select is in effect.
abc
abc
abc
abc
Orientation of placed original
The original seen
from behind
Orientation of paper The image is rotated 90 degrees
The paper seen from behind