Fax data receive/forward (manual), Inbound routing (forwarding/storing) settings, System settings► setting mode list – Sharp MX-6070N User Manual
Page 735
7-20
SYSTEM SETTINGS►SETTING MODE LIST
*1 When an internet fax expansion kit is installed.
*2 This function is not available in some countries and regions.
Fax Data Receive/Forward (Manual)
*1 When a facsimile expansion kit is installed.
*2 When an internet fax expansion kit is installed.
Inbound Routing (Forwarding/Storing) Settings
• Internet Fax Receive
Enabled
No
Yes
• POP3 Server
–
No
Yes
• Port Number
110
No
Yes
• POP Authentication
Disabled
No
Yes
• User Name
–
No
Yes
• Password
–
No
Yes
- Change Password
Disabled
No
Yes
• POP3 Communication Timeout
60sec.
No
Yes
• Reception Check Interval Setting
5 minutes
No
Yes
• Enable SSL
Disable
No
Yes
Default Settings
No
Yes
• I-Fax Own Name and Address Set
No
Yes
- Set I-Fax Own Name
–
No
Yes
- Own Address
–
No
Yes
• Direct SMTP Setting
No
Yes
- Port Number (Receive)
25
No
Yes
- Timeout
300 seconds
No
Yes
- Port Number (Send)
25
No
Yes
- Timeout
300 seconds
No
Yes
Setup Items
Factory default setting
U
A
●
Fax Data Receive/Forward (Manual) (page 7-109)
X Fax Settings
*1
No
Yes
Receive Settings
Auto Reception
No
Yes
X Internet Fax Settings
*2
No
Yes
• Manual Reception Key in Initial Screen
Enabled
No
Yes
Setup Items
Factory default setting
U
A
●
Inbound Routing (Forwarding/Storing) Settings (page 7-110)
X Inbound Routing Settings
–
No
Yes
Table Registration
–
No
Yes
Sender Settings for Received Data
No
Yes
• Receive Line Select
No
Yes
- Internet Fax
Enabled
No
Yes
Setup Items
Factory default setting
U
A