Sharp MX-6070N - Manual (Page 286)

2-122
COPIER►OTHER FUNCTIONS
Tab copying with a right binding
Originals Placing the originals Loading tab paper
Tab Copy must be specified before scanning the original.
To change the default image shift width for tab copying:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Initial Tab Copy Setting].
The factory default setting is 10 mm (1/2").
1
Tap the [Others] key, and tap the [Tab Copy] key.
2
Tap the [On] key.
1
Originals
Final image
1
Document feeder tray
Insert the originals so that the
side with no tab text enters first.
Side 2
Load the tab paper so that the tab on the
first sheet is away from you.
1
Document glass
Place so that the side with the
tab text is on the left.