Sharp MX-6070N - Manual (Page 900)

7-185
SYSTEM SETTINGS►SETTING MODE FOR FAX
Disable Fax Broadcasting
Disables facsimile broadcasting.
Receive Settings
Settings for fax transmission can be configured.
Number of Calls in Auto Reception
This setting is used to select the number of rings on which the machine automatically receives a call and begins fax
reception in auto reception mode.
The "Number of Calls in Auto Reception" that can be set in each country are shown in the following table.
Country Differentiation Table
2-Sided Printing of Received Data
This is used to have received faxes printed on both sides of the paper.
When this setting is enabled and a fax consisting of 2 or more pages is received (the pages must be the same size), the
pages are printed on both sides of the paper.
Singapore, Thailand, Malaysia, India,
Philippines 1 to 9
(default: 2) any number of minutes
from 1 to 15
(default: 1)
Hong Kong 1 to 3
(default: 2)
Taiwan 1 to 15
(default: 2)
Indonesia 1 to 5
(default: 2) any number of minutes
from 4 to 15
(default: 4)
When this setting is enabled, note that your machine will not re-attempt a call when manual transmission or direct
transmission is used.
The number of recall attempts The interval between
attempts
The number of rings
United Kingdom, France, Germany, Sweden, Italy, Spain,
Netherlands, Thailand, Hong Kong, Saudi Arabia, South
Africa, Hungary, Czech Republic, Slovakia, Poland, Greece,
Russia, Philippines, Indonesia 0 to 9
Australia, New Zealand 2 to 4
Singapore 0 to 3
Malaysia, India, Canada, Taiwan 0 to 15
If you select "0" for the number of rings, the machine will immediately answer and begin fax reception without ringing in auto
reception mode.