Yaskawa FSP Amplifier FlexWorks - Manual (Page 38)

Operating the FSP Amplifier Using FlexWorks
38
4.4.1. Writing a Program
A program is written by selecting a command from the command
list in the Workspace window (Figure 16), and adding it to the
Program window (Figure 17). For a detailed description of the
different commands, see Chapter 5, Command Reference.
You must be in Program mode to write a program.
To enter Program mode:
Click Program Mode in the toolbar, or select the
Program Mode option from the Run menu.
The maximum length of a program is 180
command lines for Sigma FSP models
without ECAM installed and 100 command
lines for those with ECAM installed
Figure 16: Workspace Window
Figure 17: Program Window
The commands in the Workspace window are divided into groups.
For further details, see Section 3.5.2, Program Window.