beautypg.com

Delta Electronics DELTA DUP-B User Manual

Page 401

background image

Chapter 4 Examples

Click Options > Recipe, it can open Recipe Setup dialog box. Enable the recipe function and set
the non-volatile area to HMI. In this example, the Length is set to 5, Group is set to 3 and
Address is set to 1@D100. After pressing Input button, the user’s screen will look like the figure
shown below.

Then, press OK button to complete the Recipe settings.

Next, click Options > Configuration, select Control Block tab. To control the read and write
operation of recipes, in this example, Control Address is set to 1@D0 and the Length is set to 8.
After complete the above settings, the user’s screen will look like the figure shown below.

4-2

Revision May, 2010