Delta Electronics DELTA DUP-B - Manual (Page 183)

Chapter 3 Creating and Editing Screens
3-162 Revision May, 2010
Property Description of Character Entry Elements
Character Length The range is with 1 ~ 28 words. The default setting is 4words.
Trigger
Trigger Type
The user can use this setting to trigger the designated controller
address to be ON before or after writing the setting value. Please
note that this function can only trigger the controller address to be
ON. If the controller address needs to be triggered again, the user
should set the address to be OFF manually.
When the input mode is Touch Popup, the user can define the style
of the keypad, including title, font, font size, font color and keypad
color. The position that the system keypad cannot display will be
placed in the center of the screen.
Edit System
Keypad
Adjust the system keypad size
Set the height of the title bar
Set the font size
Set the font
Set the font color
Set the background color
Return to the default setting
Input Mode
There are Touch Popup, Active Non-Popup and Touch Non-Popup
three options. The default setting is Touch Popup. For the
description of Active Non-Popup and Touch Non-Popup mode,
please refer to section 3.8.14 Keypad Elements.
User Security
Level
Use this option to set the user priority for pressing this element.
Only the priority that is equal to or higher than the current setting
can use this element.