Delta Electronics DELTA DUP-B - Manual (Page 198)

Chapter 3 Creating and Editing Screens
Revision May, 2010 3-177
Property Description of X-Y Distrubution Elements
Conjunction
Used to determine if a line is connected between
the distribution points. It can be an internal
memory, PLC address or constant.
0: Without a line; 1: With a line
X Min.
X Max.
Used to set the minimum and maxmum value of
X-axis. If the read value is more the maximum or
less than the minimum, the system will display the
minimum and maximum value still.
Setting
Y Min.
Y Max.
Used to set the minimum and maxmum value of
Y-axis. If the read value is more the maximum or
less than the minimum, the system will display the
minimum and maximum value still.
Grid Line Color
Horiz. Line
Number
Vert. Line
Number
Please refer to the figure below. The grid color is set to red and the
grid numbers in horizontal and vertical direction are both set to 2.
X Used to set X coordinate
Y Used to set Y coordinate
Width Used to set the element width
Height Used to set the element height