Delta Electronics DELTA DUP-B - Manual (Page 127)

Chapter 3 Creating and Editing Screens
3-106 Revision May, 2010
Property Description of Set Constant Buttons
After Execute
Macro
If this option is set, when the user presses the button, the system
will perform the operation of this button first and then execute the
command of this macro. But, if the state of the button is not
triggered by pressing the button (via macro or external signal), the
command of this macro will not be executed.
Enable the
confirm window
When this option is set, an Action Confirm dialog box will appear
to prompt the user everytime when the button is pressed.
Invisible Address When this option is set to On, this button element will be invisible.
X Used to set X coordinate
Y Used to set Y coordinate
Width Used to set the element width
Height Used to set the element height
3.8.2.5 Increment / Decrement
Property Description of Increment / Decrement Buttons
After pressing this button on the screen, HMI will read the value from PLC (Controller)
and add or subtract the set constant value. Then, write the result into PLC (Controller)
corresponding register. If the addition or subtraction result exceeds the limit
(minimum and maximum) set in HMI, HMI will save the limit value (minimum and
maximum) into the PLC (Controller) corresponding address.
Write Address
Read Address
The address can be internal memory or the controller address.
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
Text
Text Size
Font
Text Color
The user can set the text, text size, font and text color provided by
Windows® to determine the text display on the element (Please
refer to Table 3-8-2 Property Description of General Buttons.)
Bank (Picture Bank)
Picture Name
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
Transparent Effect
Transparent Color
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
Foreground Color
Style
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
Function
The user can modify the element characteristic directly without
re-create a new element. The elements that their characteristics
can be modified directly by using this option are: Increment button
and Decrement button.