Delta Electronics DELTA DUP-B - Manual (Page 172)

Chapter 3 Creating and Editing Screens
Revision May, 2010 3-151
Property Description of Dynamic Rectangle Element
Read Address +2
The value of the Read Address+2 can be used
only when Variable Size option is set to Yes. It
is used to represent the right-bottom
horizontal position (Right) of the element, i.e.
the width.
Read Address +3
The value of the Read Address+3 can be used
only when Variable Size option is set to Yes. It
is used to represent the right-bottom vertical
position (Bottom) of the element, i.e. the
height.
Read Address +4
The value of the Read Address+4 can be used
only when Variable Color option is set to Yes.
It is used to represent the line color. The
range is different depending on selected HMI.
The range for 16 shades of gray model is
within 0 ~ 15, the range for 256 colors model
is within 0 ~ 255 and the range for 65536
colors is within 0 ~ 65535.
Read Address +5
The value of the Read Address+5 can be used
only when Blink option is set to Yes. When the
value is higher than 1, the dynamic line
element will blink. If the value is 0, it will not
blink.
Read Address
Please note that when Variable Position option is set to No, the
internal memory address of Variable Size option will increase one
(one increment) automatically. (Read Address will represent the
right-bottom horizontal position (Right) of the element. Read
Address+1 will represent the right-bottom vertical position
(Bottom) of the element. Read Address+2 will represent the
foreground color of the element.)
Blink
The element can blink to remind the user. (Please refer to Table
3-8-2 Property Description of General Buttons.)
Foreground Color
Used to set the foreground color of the dynamic rectangle
element.
Line Size The unit is Pixel and the range is within 1 ~ 8.
Data Format
It provides BCD, Signed Decimal, Unsigned Decimal and Hex four
kinds of data format to define the read memory content.