Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 58)

Hardware Preparation and Installation
ATCA-7480 Installation and Use (6806800T17A) 58
Removal Procedure
To remove an MO297-A SSD module, proceed as follows:
1. Remove the blade from the system as described in Installing and Removing the Blade
on page 58 .
2. Remove the two screws holding the SSD module .
3. Remove the SSD module from the blade.
4. Reinstall the blade into the system as described in Installing and Removing the Blade
on page 58 .
2.6 Installing and Removing the Blade
The blade is fully compatible to the AdvancedTCA standard and is designed to be used in
AdvancedTCA shelves.
Damage of Circuits
Electrostatic discharge and incorrect module installation and removal can damage circuits
or shorten their life.
Before touching the module or electronic components, make sure that you are working in
an ESD-safe environment.