Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 255)

Supported IPMI Commands
ATCA-7480 Installation and Use (6806800T17A) 255
8.3.1.2.2 Response Data
The following table lists the response data applicable to the Get Serial Output command.
8.3.2 OEM Command to configure IPMI Features
5 Serial connector instance number. A sequential number that starts from 0.
Table 8-21 Request Data of Get Serial Output Command (continued)
Byte Data Field
Table 8-22 Response Data of Get Serial Output Command
Byte Data Field
1 Completion code
2 LSB of Artesyn Embedded Technologies IANA Enterprise number.
3 Second byte of Artesyn Embedded Technologies IANA Enterprise number.
4 MSB of Artesyn Embedded Technologies IANA Enterprise number.
5 Serial output selector
Table 8-23 Feature Configuration Command
Command NetFn (Request/Response) CMD Defined in
Set Feature Configuration 0x2E/0x2F 1Eh Set Feature Configuration
Command
on page 256
Get Feature
Configuration 0x2E/0x2F 1Fh Get Feature Configuration
Command
on page 257