Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 246)

Supported IPMI Commands
ATCA-7480 Installation and Use (6806800T17A) 246
tpm_operation TPM Function. This option will
automatically return to No-Operation. no_operation
disable_deactivate
enable_activate
boot_type Boot Type dual
legacy
uefi
boot_priority Determine whether EFI devices or Legacy
devices are booted first uefi
legacy
boot_netprot PXE Boot capability ipv4
ipv6
ipv4v6
legacy
boot_frontnet Front Panel Net Boot on
off
boot_basenet Base Network Boot on
off
boot_fabricnet Fabric Network Boot on
off
boot_rtmnet RTM Network Boot on
off
boot_artmsas RTM SAS disk Boot on
off
boot_usb USB device boot on
off
info_tmout The number of seconds that the firmware
will wait for key on
off
boot_oder Set the Boot Order
See next table device1… deviceN
separated by comma
Table 8-14 System Boot Options Parameter #100 - Supported Parameters (continued)
Parameter Description Values