Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 195)

BIOS
ATCA-7480 Installation and Use (6806800T17A) 195
Memory Configuration
The following table contains description about the options that can be configured in Memory
configuration.
Figure 6-13 Memory Configuration
Table 6-9 Advanced >> Memory Configuration
Item Values IPMI Boot parameter Description
Memory Frequency Auto, 1333, 1600,
1867, 2133 mem_speed Maximum Memory Frequency Selections in
MHz.
Halt on Training
Error Enabled, Disabled mem_halt Enables/Disables Halt on Memory Training
Error.
NUMA Enabled, Disabled mem_numa Enables/Disables Non Uniform Memory
Access (NUMA).
Hardware Memory
Test Disabled, Short,
Long mem_test Select Hardware Memory Test