Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 176)

BIOS
ATCA-7480 Installation and Use (6806800T17A) 176
Press key when requested. The main menu appears. It looks similar to the one shown in
the following figure.
In order to navigate in setup, use the arrow keys on the keyboard to highlight items on the
menu. All other navigation possibilities are shown at the bottom of the menu.
Additionally, an item-specific help is displayed on the right side of the window.
Figure 6-1 Main menu
 Make sure that BIOS is properly configured prior to installing the operating system and
its drivers.
 If you save changes in setup, the next time the blade boots up, BIOS configures the
system according to the setup selections stored. If those values cause the system boot
to fail, reboot and enter setup to get the default values or to change the selections that
caused the failure.