Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 291)

IPMI Feature Set
ATCA-7480 Installation and Use (6806800T17A) 291
Cipher Suite Priv Max : Not Available
root@ATCA7480:~#
2. Configure base interface into IPMC subnet (instead the IP of the IPMC can be changed as
well).
root@ATCA7480:~# ./ifconfig base1:1 172.16.0.70
3. Upgrade the firmware.
root@ATCA7480:~# ./ipmitool -C 1 -I lanplus -U rmcp -P rmcp -H
172.16.0.221 -k gkey hpm upgrade /root/bios.hpm activate
PICMG HPM.1 Upgrade Agent 1.0.9:
Validating firmware image integrity...OK
Performing preparation stage...
Services may be affected during upgrade. Do you wish to continue?
y/n y
OK
Performing upgrade stage:
---------------------------------------------------------------
----------------
|ID | Name | Versions |
% |
| | | Active | Backup | File
| |
|----|-------------|-----------------|-----------------|-------
----------|----|
|* 6|PYLD F/W | 128.02 00000003 | 128.02 00000003 | 0.02
00000003 |100%|
| |Upload Time: 01:40 | Image Size: 16777217 bytes
|
---------------------------------------------------------------
----------------
(*) Component requires Payload Cold Reset
Performing activation stage:
Firmware upgrade procedure successful