14 reset ipmc command, 15 hang ipmc command, 14 reset ipmc command 8.4.15 hang ipmc command – Artesyn ATCA-7480 Installation and Use (February 2015) User Manual
Page 272: Table 8-42, Reset ipmc command description, Table 8-43, Hang ipmc command description, Ng ipmc, Supported ipmi commands
Supported IPMI Commands
ATCA-7480 Installation and Use (6806800T17A)
272
8.4.14 Reset IPMC Command
The Reset IPMC command allows the payload to reset the IPMC over the KCS host interface.
8.4.15 Hang IPMC Command
The IPMC provides a way to test the watchdog timer support by implementing the Hang IPMC
command, which simulates firmware hanging by entering an endless loop.
Table 8-42 Reset IPMC Command Description
Type Byte
Data
Field
Request Data
1:3
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
4
Reset Type Code
0x00: Cold IPMC reset to the Current mode
0x01: Cold IPMC reset to the Normal mode
0x02: Cold IPMC reset to the Standalone mode, for a
description refer to
0x03: Cold IPMC reset to the Manual Standalone mode, for
a description refer to
0x04: Reset the IPMC and enter Upgrade mode
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00
Table 8-43 Hang IPMC Command Description
Type Byte
Data
Field
Request Data
1:3
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
Response Data
1
Completion Code