Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 204)

BIOS
ATCA-7480 Installation and Use (6806800T17A) 204
PXE Boot
capability Disabled,
UEFI:IPv4,
UEFI:IPv6,
UEFI:IPv4/IPv6,
Legacy boot_netprot Disabled: Support Network Stack. UEFI PXE:
IPv4/IPv6. Legacy: Legacy PXEOPROM only.
Front Panel Net
Boot Enabled,
Disabled boot_frontnet Controls execution of the Option ROM for the
Front Panel Ethernet controller. Select Enabled
when Front Panel Boot is required.
Base Network
Boot Enabled,
Disabled boot_basenet Controls execution of the Option ROM for both
Base Network Ethernet controller. Select Enabled
when Base Network Boot is required.
Fabric Network
Boot Enabled,
Disabled boot_fabricnet Controls execution of the Option ROM for all
Fabric Network Ethernet controller. Select
Enabled when Fabric Network Boot is required.
RTM Network
Boot Enabled,
Disabled boot_rtmnet Controls execution of the Option ROM for RTM
Network Ethernet controller. Select Enabled
when RTM Network Boot is required.
RTM SAS Boot Enabled,
Disabled boot_artmsas Controls execution of the Option ROM for RTM
SAS controller. Select Enabled when RTM SAS
Boot is required.
USB Boot Enabled,
Disabled boot_usb Disables/Enables booting from USB port devices.
Info Screen
Timeout 0 .. 10 info_tmout The number of seconds that the firmware will wait
for key.
Table 6-16 Boot (continued)
Item Values IPMI Boot parameter Description