Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 257)

Supported IPMI Commands
ATCA-7480 Installation and Use (6806800T17A) 257
The following table provides the feature set supported with ATCA-7480:
8.3.2.2 Get Feature Configuration
This command can be used to get the state of feature configuration during IPMC runtime.
Table 8-25 Feature Selector Assignments
Feature Selector Description
(3) 03h Handle Debounce
(224) E0h FAILSAFE Function Enable/Disable. For details, see Fail Safe
Logic on page 316 .
(225)E1h FAIL PROTECT Function Enable/Disable. For details, see Fail
Protect Logic on page 319 .
Table 8-26 Get Feature Configuration Command
Byte Data Field
Request Data 1 LSB of Artesyn IANA Enterprise Number. A value of CDh shall be
used.
2 2nd byte of Artesyn IANA Enterprise Number. A value of 65h
shall be used.
3 MSB of Artesyn IANA Enterprise Number. A value of 00h shall
be used.
4 Feature Selector, for details see table 3