Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 311)

IPMI Feature Set
ATCA-7480 Installation and Use (6806800T17A) 311
The IPMC provides 10 MAC addresses in its FRU information.
 4 x 40G fabric implemented with two Forthville NIC
 2 x 1G Base and 2 x 1G to front implemented with one Powerville NIC
 2 x SOL
2 1 MAC Address Count (M) (specifying a continuous pool of MAC addresses
starting with the MAC address specified in this descriptor)
M = 1: this descriptor specifies one MAC address
M > 1: this descriptor specifies a pool of MAC addresses with M count
3 6 MAC Address. (Canonical form, the LSB (least significant bit) first.
Table 9-9 Interface Type Assignments
Interface Type Description
01h ATCA Base Interface
02h ATCA Fabric Interface
03h Front/Rear Panel
04h Mezzanine Module
05h Serial over LAN (SOL)
06h Fibre Channel / WWPN
07h AMC/MicroTCA Common Options Region
08h AMC/MicroTCA Fat Pipe Region
09h AMC/MicroTCA Extended Fat Pipe Region
10h ATCA Update Channel
11h Multi-type (Base, Fabric, and Update channel (or two types
of it) are connected to a onboard switch)
11h - FFh reserved
Table 9-8 Artesyn MAC Address Descriptor (continued)
Offset Length Description