Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 47)

Hardware Preparation and Installation
ATCA-7480 Installation and Use (6806800T17A) 47
If you integrate the blade in your own system, contact your local sales representative for further
safety information.
2.2.2 Power Requirements
The blade's power requirements depend on the installed hardware accessories. If you want to
install accessories on the blade, the load of the respective accessory has to be added to that of
the blade. In the following table you will find typical examples of power requirements with and
without accessories installed. For information on the accessories' power requirements, refer to
the documentation delivered together with the respective accessory or consult your local
Artesyn Embedded Technologies representative for further details.
Table 2-2 Critical Temperature Limits
Component
Thermal Design
Power
Max Case or Junction Temperature
All product variants using
the following processor:
Intel Xeon E5-2648L V3 75W Tj.max ~87 o C (CPU specific and readable in
TEMPERATURE_TARGET register)
All product variants using
the following processor:
Intel Xeon E5-2618L V3 75W Tj.max ~87 o C (CPU specific and readable in
TEMPERATURE_TARGET register)
All product variants using
the following processor:
Intel Xeon E5-2658 V3 105W Tj.max ~87 o C (CPU specific and readable in
TEMPERATURE_TARGET register)