Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 307)

IPMI Feature Set
ATCA-7480 Installation and Use (6806800T17A) 307
9.3.8 ME Power Failure Sensor
The IPMC evaluates the ME Power Failure Register to report power failures at the ME engine
domain. When a ME failure occurs, the red power failure LED (signal PWR_FAIL_) is blinking.
The error state is kept until ME wakes up (signal SLP_A_ becomes high). For more information,
see
Table 5-44 .
For failing states and their coding, see Table 5-45 .
9.3.9 Payload Power Failure State Sensor
The IPMC evaluates the Payload Power Failure Register to report power failures at the payload
domain.
When a Payload Power failure occurs, the red power failure LED is switched ON (signal
PWR_FAIL_
is driven low).
Internal ADC Front blade Temperature
+3.3V Mgmt
+12V
+1.2V
+3.3V
+5V
RTM 3.3V Mgmt
RTM 12V A2F ADC
0x90 MMC RTM Temperature Inlet LM75
0x92 MMC RTM Temperature Outlet LM75
Internal ADC MMC RTM 12V
3.3V
1.05V
0.8V ATMEL ADC
Table 9-5 Voltage and Temperature Sensor Devices (continued)
I2C address I2C bus Domain Purpose Device