Artesyn ATCA-7480 Installation and Use (February 2015) - Manual (Page 270)

Supported IPMI Commands
ATCA-7480 Installation and Use (6806800T17A) 270
8.4.11 Set Payload Communication Time-Out Command
The Set Payload Communication Time-Out command sets the payload communication time-
out value.
5 Payload Time-out
Payload communication time-out measured in hundreds
of milliseconds. Thus, the payload communication time-
out may vary from 0.1 to 25.5 seconds.
Table 8-38 Get Payload Communication Time-Out Command Description (continued)
Type Byte Data Field
Table 8-39 Set Payload Communication Time-Out Command Description
Type Byte Data Field
Request Data 1:3 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
4 Payload Time-out
Payload communication time-out measured in hundreds
of milliseconds. Thus, the payload communication time-
out may vary from 0.1 to 25.5 seconds.
Response Data 1 Completion Code
2:4 PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00