Echelon OpenLNS Commissioning Tool - Manual (Page 360)

344 Appendix A - Setting OpenLNS CT Default Options
Warnings Options
The Warnings category contains the following options, which are all selected by default.
Enable Warning When
New Device Requires
Commissioning
Displays a message when you create a new device that needs to be
commissioned.
Scope: Current network, current OpenLNS CT computer
Enable Warning When
Functional Block has
no Matching Device Displays a message when you drag a functional block SmartShape
onto a drawing but there is no compatible device on the drawing
page. You will be prompted to select another subsystem.
Scope: Current network, current OpenLNS CT computer
Enable Warning When
Commissioning OffNet Displays a message when you commission a device or router
while OpenLNS CT is OffNet. Commissioning while OpenLNS
CT is OffNet sets the Neuron ID of the device SmartShape, but it
does not affect the physical device.
Scope: Current network, current OpenLNS CT computer
Enable Warning When
Incompatible
Application is Loaded Displays a message if you attempt to load an incompatible
application image into a device.
Scope: Current network, current OpenLNS CT computer
Enable Warning
Before Upgrading
NSD
Displays a message when upgrading the OpenLNS network
interface, which is represented by the network service device
(NSD) SmartShape in the OpenLNS CT drawing.
OpenLNS CT upgrades the network interface when you upgrade
from a version of OpenLNS CT before LonMaker Release 3, or if
you are switching between a fast OpenLNS network interface
(layer 2) and an OpenLNS network interface (layer 5). If you
attempt to do either of these, OpenLNS CT will ask whether to
upgrade the NSD. For best performance, perform the upgrade. If