Echelon OpenLNS Commissioning Tool - Manual (Page 347)

OpenLNS CT User’s Guide 331
selected by default.
Scope: Current network, current OpenLNS CT computer
Automatically
upgrade Visio
drawings to current
version Automatically upgrades an OpenLNS CT drawing to the current
version of Visio you are using, if possible. This option is selected by
default.
Scope: All networks, current OpenLNS CT computer
Disable plug-in
pre-launch Disables the pre-launching of plug-ins when an OpenLNS CT
drawing is opened. This option is cleared by default.
Scope: All networks, current OpenLNS CT computer
Enable Error Log Writes all displayed error messages to the error log, which is stored
in the drawing directory of the OpenLNS CT network. This option
is cleared by default.
The error log is circular and has a maximum size of 100K; therefore,
error messages at the beginning of the log will be overwritten to
store new error messages.
Scope: All networks, current OpenLNS CT computer
OpenLNS Event Options
The OpenLNS Event options category contains a set of check boxes for enabling and disabling
OpenLNS events that are used to update the OpenLNS CT drawing. To maintain synchronization
between your OpenLNS CT drawing, the OpenLNS CT database, and other OpenLNS CT tools,
applications, and plug-ins, enable all the OpenLNS events. If you are using an OpenLNS tool,
application, or plug-in other than OpenLNS CT to make changes to the OpenLNS network database,
OpenLNS CT uses OpenLNS events to keep OpenLNS CT synchronized with that OpenLNS
application or plug-in.
If you are only using OpenLNS CT, you can disable all the OpenLNS events except for the
device/router commission and attachment events, as OpenLNS CT tracks these events itself. A benefit
of disabling the OpenLNS events is that it may improve network performance.