Echelon OpenLNS Commissioning Tool - Manual (Page 346)

330 Appendix A - Setting OpenLNS CT Default Options
General Options
The General category contains the following options.
Confirm Deletes Prompts you to confirm the deleting of an OpenLNS CT
SmartShape. This option is selected by default.
Scope: Current network, current OpenLNS CT computer
Force Wizard
Prompts Displays all wizards when you create a new OpenLNS CT
SmartShape, regardless of the settings of any other options. This
option is cleared by default.
If this check box is selected, and you create a functional block with
automatic device selection enabled, for example, the Functional
Block Wizard will still open.
If this check box is cleared and a functional block and its associated
device are copied, for example, the new functional block will
automatically be associated with the new device and the Functional
Block Wizard will not open.
Scope: Current network, current OpenLNS CT computer
Enable Tracing Enables OpenLNS CT tracing. This option is cleared by default.
The OpenLNS CT tracing output is saved in a file called trace.log,
which is stored in the
C:\Users\Public\Documents\LonWorks\OpenLnsCt\
\Drawings\<network> folder.
Scope: Current network, current OpenLNS CT computer
Enable Monitoring Enables connection monitoring and data point monitoring. Clear this
check box to disable all NV polling by OpenLNS CT. This check
box does not affect the OpenLNS CT Browser. This option is