Medialinx mla101 info tab – ClearOne NetStreams DigiLinX Dealer User Manual
Page 90
DigiLinX Dealer Setup Version 2.35.00
5-20
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 5-18
MediaLinX MLA101 Info tab
The Info tab contains all of the information about that particular MediaLinX MLA101. Table 5-11 provides
information on the fields on the Info tab.
Table 5-11
MediaLinX MLA101 Info Tab
Tab
Selection Description
Info
Current IP Address
The current IP address of the MediaLinX.
Current Subnet Mask
The current subnet mask of the MediaLinX.
Device Type
The type of DigiLinX device that this is.
Model Number
The NetStreams MediaLinX model number.
Firmware Version
What firmware version is currently running on the MediaLinX.
Device Name
Descriptive name the installer assigned to the device when
creating the project.
Override
Changes the default device name. Keep unchecked in most
instances.
Serial Number
Displays the MediaLinX serial number.
Device Comments
Indicate where the device is installed so that if you need to
return to the installation for service or upgrading devices, you
can have access to this information in the project file.
Device Summary
Source Name
The Descriptive name entered by the installer when the
device was added.
Stream Name
Name of the stream that the MediaLinX is managing.
Show Advanced Options
Normally used for advanced configurations. Typically, the
installer will not use this screen.