General purpose driver/ir – ClearOne NetStreams DigiLinX Dealer User Manual
Page 114
DigiLinX Dealer Setup Version 2.35.00
5-44
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 5-36
Menu tab for the ControLinX with a General Purpose Driver
The Menu tab designates which rooms display the preset buttons. By default, all rooms have access to the
General Purpose Driver buttons.
Table 5-26 provides information on the fields available for editing the Menu tab.
8.
Once all changes have been made, select Apply.
NOTE:
For information on the Input Sensor tab, see Input Sensor Tab for a ControLinX Contained in a MLA4000
on page 5-32.
General Purpose Driver/IR
To edit ControLinX settings for the General Purpose Driver/IR, complete the following steps:
1.
Connect the ControLinX with the external system using the 3.5mm to RS232 cable.
Table 5-26
Menu Tab
Tab
Selection Description
Menu
List of Rooms
This is a dropdown list of all rooms that have presets listed
for them.