Info tab – ClearOne NetStreams DigiLinX Dealer User Manual
Page 197
Editing Devices
5-127
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
2.
Enter any device comments in the Device Comments field and select Apply.
3.
Select the Settings tab and the Settings tab displays as shown in Figure 5-109.
See Table 5-91 for a description of the fields on this screen.
Figure 5-109
Settings Tab for DoorLinX
Table 5-90
Info Tab
Tab
Selection Description
Info
Current IP Address
The current IP address of the DoorLinX.
Current Subnet Mask
The current subnet mask of the
DoorLinX.
Device Type
The type of DigiLinX device that this is.
Model Number
The NetStreams DoorLinX model number.
Firmware Version
The firmware version currently running on the DoorLinX.
Device Name
Descriptive name the installer assigned to the device when
creating the project.
Override
Changes the default device name. Keep unchecked in most
instances.
Serial Number
The serial number of the DoorLinX device.
Device Comments
Indicate where the device is installed so that if you need to
return to the installation for service or upgrading devices, you
can have access to this information in the project file.
Device Summary
Cameras
Shows any cameras connected to DoorLinX.
Relay
The relay setting for the DoorLinX.
Doorbell File
The name of the MP3 file to play when DoorLinX is activated.