ClearOne NetStreams DigiLinX Dealer - Manual (Page 277)

TheaterLinX
13-1
1
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
Chapter
13
TheaterLinX
TheaterLinX (TH100) is designed as a bridge between an A/V Reciever (AVR) and the
DigiLinX multi-room audio system. TheaterLinX enables one stream of stereo audio
to be sent from the AVR to any audio zone or one stream of stereo audio to be sent
from any source in the multi-room audio system to the AVR. Additionally,
TheaterLinX enables the end user to control the AVR from the DigiLinX user
interface.
TheaterLinX will allow door chimes or intercom to function through the AVR. The
behavior based on the AVR state is described below:
There are a number of options when configuring TheaterLinX in Dealer Setup, this
chapter outlines those options.
Adding TheaterLinX to the Project
After clicking add device and selecting 1 or more TheaterLinX you will be presented
with the screen shown in figure 1.
Table 13-1 TheaterLinX Intercom Behavior
AVR State Behavior
AVR is playing a source that is directly connected AVR will switch to Intercom/Doorbell session and
switch back once the session has ended.
AVR is playing a source from the multiroom envi-
ronment Same behavior as a SpeakerLinX
AVR is off No Intercom or Doorbell is played through the
AVR