After adjusting information, select apply, Controlinx ir/rs232 settings tab – ClearOne NetStreams DigiLinX Dealer User Manual
Page 181
Editing Devices
5-111
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
The IR/RS232 Settings tab is primarily an informational tab. The screen provides more detailed information
about the RS232 settings used to communicate with the GE Concord device.
Table 5-77 provides information on the fields on the IR/RS232 Settings tab.
5.
After adjusting information, select Apply.
6.
Select the Labels tab.
The Labels tab for the ControLinX hosting a GE Concord displays in the right side of the window (see
Figure 5-96).
Table 5-77
ControLinX IR/RS232 Settings Tab
Tab
Selection Description
IR/RS232 Settings
Service Name
A display field used to identify the device name.
Driver
The driver used for the connected device.
Driver File
The driver file used to communicate with the device.
NOTE:
Once you’ve selected GE Security as the driver for
this ControLinX, you will not be able to change it to
any other device without removing the CL100 from
the device list and re-adding it.
Control Type
Defined by the specific product driver.
Baud Rate
Information provided by the manufacturer of the attached
device.
Data Bits
Information provided by the manufacturer of the attached
device.
Parity
Information provided by the manufacturer of the attached
device.
Stop Bits
Information provided by the manufacturer of the attached
device.