Audio tab for the ip speaker – ClearOne NetStreams DigiLinX Dealer User Manual
Page 210
DigiLinX Dealer Setup Version 2.35.00
5-140
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
The Audio tab provides for adjustment of the IP speaker amplifier settings. Table 5-98 provides information
on the fields on the Audio tab.
4.
After adjusting information on the Audio tab, select Apply.
5.
Select the Stream tab.
Stream information displays (see Figure 5-120).
Figure 5-120
Streams tab
From this screen, you can select the media server and the stream the StreamNet card in the IP Speaker is
hosting. You can also disable the service. Table 5-99 provides information on the fields on the Streams tab.
Table 5-98
Audio Tab for the IP Speaker
Tab
Selection Description
Audio
Room Name
The name of the room where the IP speaker is located.
Service Type
A display field used to indicate the service type.
Volume Level
Default level of the volume at startup.
Balance
Adjusts the balance of the IP speaker.
Service Name
The stream name of the StreamNet SN1000 player.
Show Audio Settings on user
interface
Enables the audio settings to be adjustable from the
TouchLinX.