ClearOne NetStreams DigiLinX Dealer - Manual (Page 76)

DigiLinX Dealer Setup Version 2.35.00
5-6
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
MediaLinX A/V
This section discusses editing settings for the MediaLinX A/V. To edit settings for a MLA101, refer to
MediaLinX MLA101 on page 5-19. To edit settings for an MLA4000, refer to MediaLinX MLA4000 on page 5-
24.
1. Click the MediaLinX A/V in your project list.
The Info tab for the MediaLinX A/V displays in the right side of the window (see Figure 5-5).
Figure 5-5 MediaLinX A/V Info tab
The Info tab contains all of the information about that particular MediaLinX A/V. Table 5-5 provides
information on the fields available for editing the Info tab.
Table 5-5
MediaLinX A/V Info Tab
Tab Selection Description
Info Current IP Address The current IP address of the MediaLinX A/V.
Current Subnet Mask The current subnet mask of the MediaLinX A/V.
Device Type The type of DigiLinX device that this is.
Model Number The NetStreams MediaLinX A/V model number.
Firmware Version What firmware version is currently running on the MediaLinX
A/V.
Device Name Descriptive name the installer assigned to the device when
creating the project.
Serial Number Displays the MediaLinX A/V serial number.
Device Comments Indicate where the device is installed so that if you need to
return to the installation for service or upgrading devices, you
can have access to this information in the project file.
Device Summary