Set the workgroup to netstreams, Set the dns and gateway, Set the dns and gateway -10 – ClearOne NetStreams DigiLinX Dealer User Manual
Page 308
DigiLinX Dealer Setup Version 2.35.00
15-10
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Set the Workgroup to NetStreams
The Streaming Music Manager is pre-configured to use the work group Netstreams.
The PC that contains the music will also need to use the workgroup Netstreams.
Set the DNS and Gateway
The Streaming Music Manager needs to be configured with the home network’s DNS
and Gateway. The easiest way to determine the home network’s DNS and gateway
address is to look it up on the PC with music. To do this, follow these instructions.
1.
Go to the PC.
2.
Click on Start.
3.
Select Run.
4.
Type:
CMD/
5.
Click OK.
6.
Enter:
IPCONFIG /ALL
7.
Several lines of TCP/IP information will appear. Look for the term ‘Default
Gateway’ and note the IP address next to it as shown in Figure 15-10.
Figure 15-10
TCP/IP Infomation