ClearOne NetStreams DigiLinX Dealer - Manual (Page 266)

DigiLinX Dealer Setup Version 2.35.00
11-14
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Intercom Services Actions
Actions that control the intercom functions of the DigiLinX system.
Lutron or other lighting system
Press Button Executes command assigned to the lighting button.
Release Button If needed, releases button executing command.
Panorama Driver
Press Button 1 Execute learned IR accessed by button 1 for selected display.
Press Button 2 Execute learned IR accessed by button 2 for selected display.
Press Button 3 Execute learned IR accessed by button 3 for selected display.
Press Button 4 Execute learned IR accessed by button 4 for selected display.
Press Button 5 Execute learned IR accessed by button 5 for selected display.
Press Button 6 Execute learned IR accessed by button 6 for selected display.
GE Concord or other security system
Press Button Sends a button press. Must select specific button to send from the parameters.
Release Button Releases a button.
Relay
Set Relay State ON ?Paul
Set Relay State OFF ?Paul
Table 11-8
Intercom Services Actions
Action Description
Cancel Intercom Session Terminate the intercom session or monitoring.
Call All Rooms Initiate session with all rooms.
Monitor a Room Indicate room to monitor and room to listen.
Turn Do Not Disturb On Blocks all intercom sessions.
Turn Do Not Disturb Off Allows intercom sessions to be initiated.
Turn Privacy On Prevents the room from being monitored.
Turn Privacy Off Allow the room to be monitored.
Set Intercom Volume Set intercom volume level.
Table 11-7
Control Services Actions
Action Description