ClearOne NetStreams DigiLinX Dealer User Manual
Page 274
DigiLinX Dealer Setup Version 2.35.00
12-4
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
configuration using an EIM splitter, SpeakerLinX, SwitchLinX, MU290, Audio Port,
and IRLinX.
Figure 12-1
KeyLinX Configuration with an IRLinX
NOTE:
Maximum CAT5 cable length for EIM connections is 60 feet.
To connect the KeyLinX configuration shown in the figure above, follow these steps:
1.
Locate the cable and splitter under the cardboard located at the bottom of the Key-
LinX box.
2.
Connect the SpeakerLinX to the EIM splitter connector labeled SpeakerLinX using
the 1 foot cable provided.
3.
Connect the KeyLinX to the EIM splitter jack labeled KeyLinX.
Legend
CAT5
KL1R