ClearOne NetStreams DigiLinX Dealer User Manual
Page 54
DigiLinX Dealer Setup Version 2.35.00
3-18
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
1.
Enter the following information:
Name. Name of the media server for this project.
Server IP Address. See DigiLinX and IP Addresses in the DigiLinX Installation
and Design Guide.
NOTE:
Until you enter an IP address, the Save & Continue button will not function.
Server Type. Select the the DigiLinX-compatible brand of media server you’re
using from the dropdown list (using the down arrow key):
Audio ReQuest (all models)
Imerge SoundServer MKII
Escient Fireball
(E-40, E-120, E2-40, E2-100, E2-200, E2-160, E2-300,
DVDM-300, DVDM-552, MX752, MX531, MX111, AVX-552, AVX-331,
AVX-211 models only)
NetStreams Streaming Music Manager.
See Figure 3-21 for an example of the completed device information.
Figure 3-21
Media Server dialog box
2.
Select Save & Continue.
Complete the configuration for all compatible media servers in your project. After
finishing the last media server, you will be prompted for information for IP
cameras (if any). See Figure 3-22.