Controlinx and netstreams panorama, Controlinx and – ClearOne NetStreams DigiLinX Dealer User Manual
Page 174
DigiLinX Dealer Setup Version 2.35.00
5-104
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
5.
Once all scenes have been added, use the up and down arrows located under the menu listing to adjust the
order the scenes are presented in.
6.
After adjusting information, select Apply.
NOTE:
For information on the Input Sensor tab, see Input Sensor Tab on page 5-85.
ControLinX and NetStreams Panorama
To edit ControLinX settings for control of the NetStreams Panorama Video Distribution System, complete the
following steps:
1.
Connect the NetStreams RS232 cable (included with the ControLinX) to a null modem cable and connect it to
the Panorama through the RS232 (IO2) on the Panorama unit.
2.
Click on the ControLinX you want to edit in the project.
The Info tab for the ControLinX hosting Panorama displays in the right side of the window (see Figure 5-89).
Figure 5-89
ControLinX with NetStreams Panorama Info tab
Table 5-72
Menu Tab
Tab
Selection Description
Menu
List of Rooms
Select the room from the list of rooms for the phantom
buttons.
Available Scenes
Select the scene and select the right arrow to move the
scene to the room.
The name of the room for which you are enabling scenes.