ClearOne NetStreams DigiLinX Dealer User Manual
Page 278
DigiLinX Dealer Setup 2.35.00
13-2
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 13-1
Add TheaterLinX Dialog box
Field
Description/Values
TheaterLinX Name
The name of the TheaterLinX zone in the project, you
should name this similar names to how you might name
a SpeakerLinX zone. (e.g. Home Theater)
Model Number
TH100 is the only value; reserved for future use
AVR Driver
TheaterLinX supports 2 mechanisms to control AVRs,
IR, and RS-232. At shipping TheaterLinX supports the
full line of Marantz and Denon AVRs. The ARCAM DIVA
AVR250, AVR208, AVR300, AVR350, and AVR700, and
Naim nVi and AV2 RS-232 drivers are available for
separate download.
Digi/AVR Input
Specifies the input of the AVR which is connected to the
TheaterLinX audio output. This input will not be
available for source control while it is being used by
TheaterLinX
Source 1-8
Name the Theater sources connected to the AVR or use
the defaults for the Marantz and Denon AVRs. See
Figure 13-2 and 13-3 for Marantz and Denon defaults.
Port (within each source selection)
Specify the control output used to control the specific
source see Figure 13-4 for available ports. The same
port maybe used for devices of different types.
Type (within each source selection)
Specify the type of source connected to the AVR. See
Figure 13-5 for source types.
Enable (Checkbox)
Enable or disable control of this source